=============================================================================== IBM Tivoli Storage Manager Device Support README Version 5, Release 3, Mod 3, Level 3 Licensed Materials - Property of IBM 5608-ISM 5608-ISX (C) Copyright International Business Machines Corp. 1990, 2006. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp =============================================================================== This document includes updated information for the documentation provided with IBM Tivoli Storage Manager Version 5.3.3. APAR Fixes in Interim Fix 5.3.3.3 --------------------------------- IC49670 DEFINE PATH TO ATL M2500 LIBRARY FAILS APAR Fixes in Interim Fix 5.3.3.2 --------------------------------- IC49307 ANR8302E REPORTED DUE TO AN INCORRECT TIMEOUT VALUE USED IC49501 SOLARIS MT DEVICE DRIVER KERNEL PANIC RECURSIVE MUTEX_ENTER IC49587 TSM DEVICE DRIVER INVALIDLY ISSUES ADSM_DD_LOG4 FOR TAPE DEVICE APAR Fixes in Interim Fix 5.3.3.1 --------------------------------- IC49077 TSM DEVICE DRIVER INVALIDLY ISSUES ADSM_DD_LOG4 FOR STK DEVICES IC49207 TSM FAILS TO DEFINE THE LIBRARY PATH IN A SPECTRA LOGIC 2K =============================================================================== New Device Support =============================================================================== All new devices are supported on AIX, HP-UX, Linux, Solaris and Windows unless indicated otherwise. New Drive Support in Interim Fix 5.3.3.3 ---------------------------------------- 1. Quantum DLT-S4 New Library Support in Interim Fix 5.3.3.3 ------------------------------------------ 1. Qualstar XLS-8 2. Tandberg StorageLibrary T40 New Drive Support in Interim Fix 5.3.3.2 ---------------------------------------- 1. Sony SDX-800V New Library Support in Interim Fix 5.3.3.2 ------------------------------------------ 1. ADIC FastStor 2.1 New Drive Support in Interim Fix 5.3.3.1 ---------------------------------------- 1. Exabyte VXA320 2. IBM 25R0045 New Library Support in Interim Fix 5.3.3.1 ------------------------------------------ 1. Fujitsu ETERNUS LT160 2. IBM 87691VX For more information on devices supported by the IBM Tivoli Storage Manager device driver, please point your web browser to the following URL: http://www-3.ibm.com/software/sysmgmt/products/support/IBM_TSM_Supported_Devices_for_AIXHPSUNWIN.html http://www-3.ibm.com/software/sysmgmt/products/support/IBM_TSM_Supported_Devices_for_Linux.html StorPort Driver Support ----------------------- The Tivoli Storage Manager device driver version 5.3.3 and hotfix 901371 are required. See more information on this hot fix at http://support.microsoft.com/default.aspx/kb/901371. This hotfix should be available end of May 2006. Host Bus Adapter Requirements ----------------------------- It is highly recommended that Tape Drives and Tape Libraries be connected to the system on their own host bus adapter and not share with other devices types (DISK, CDROM, etc.). Optical Devices on Solaris -------------------------- On Solaris, if the Volume Management daemon (vold) is enabled, it may manage and control the optical devices which are used by the TSM server. To prevent the Volume Management daemon from managing removable disks including optical devices, comment out the following line in /etc/vold.conf. use rmdisk drive /dev/rdsk/c*s2 dev_rmdisk.so rmdisk%d Users can also modify /etc/vold.conf to allow specific devices not used by the TSM server to be used by the Volume Management daemon. See the man page for vold.conf for more information. Emulex HBA Driver for Solaris ----------------------------- To avoid TSM server hangs, the Emulex HBA driver version 6.02f or later for Solaris is recommended. ******************************************************************************* Drive Information ******************************************************************************* ========================== Exabyte VXA320 Tape Drive ========================== 1. When defining a device class for a Exabyte VXA320 drive, use o devtype=8MM o format= Example: DEFine DEVclass devclassname DEVType=8MM FORMAT=VXA3 ..... DEFine DEVclass devclassname DEVType=8MM FORMAT=VXA3C ..... VXA3 - Specifies that IBM Tivoli Storage Manager writes data that uses the VXA3 recording format. This format results in a cartridge capacity of 160GB when using VXA X23 media. VXA3C - Specifies that IBM Tivoli Storage Manager writes data that uses the VXA3C recording format with compression. This format results in a cartridge capacity of 320GB when using VXA X23 media. 2. Exabyte VXA320 drive has a data compression ratio of 2:1 3. Device identification and firmware level Drive ID : Exabyte VXA-3 Firmware : 3106 4. Supported media o X23 Media (230 Meter) 5. Exabyte VXA320 drive reports drive serial number. ============================= IBM 25R0045 VXA320 Tape Drive ============================= 1. When defining a device class for a IBM 25R0045 VXA320 drive, use o devtype=8MM o format= Example: DEFine DEVclass devclassname DEVType=8MM FORMAT=VXA3 ..... DEFine DEVclass devclassname DEVType=8MM FORMAT=VXA3C ..... VXA3 - Specifies that IBM Tivoli Storage Manager writes data that uses the VXA3 recording format. This format results in a cartridge capacity of 160GB when using VXA X23 media. VXA3C - Specifies that IBM Tivoli Storage Manager writes data that uses the VXA3C recording format with compression. This format results in a cartridge capacity of 320GB when using VXA X23 media. 2. IBM 25R0045 VXA320 drive has a data compression ratio of 2:1 3. Device identification and firmware level Drive ID : IBM VXA-3 Firmware : 3105 4. Supported media o X23 Media 5. IBM 25R0045 VXA320 drive reports drive serial number. ============= Sony SDX-800V ============= 1. When defining a device class for a Sony SDX-800V drive, use o devtype=8MM o format= Example: DEFine DEVclass devclassname DEVType=8MM FORMAT=AIT ..... DEFine DEVclass devclassname DEVType=8MM FORMAT=AITC ..... AIT - Specifies that IBM Tivoli Storage Manager writes data that uses the AIT recording format. This format results in a cartridge capacity of 150GB when using Sony SDX3X-150C media. AITC - Specifies that IBM Tivoli Storage Manager writes data that uses the AIT recording format with compression. This format results in a cartridge capacity of 300GB when using Sony SDX3X-150C media. 2. Sony SDX-800V drive has a data compression ratio of 2:1 3. Device identification and firmware level Drive ID : SONY SDX-800V Firmware : 0100 4. Supported media o SDX3X-150C AIT-3Ex 150 GB Read/Write data cartridge o SDX3-100C AIT-3 100 GB Read/Write data cartridge o SDX2-50C AIT-2 50 GB data cartridge (Read Only) o SDX2-36C AIT-2 36 GB data cartridge (Read Only) 5. Sony SDX-800V currently does not support WORM media. 6. The CLEAN DRIVE command is not supported with Sony SDX-800V drive. 7. Sony SDX-800V drive reports drive serial number. ============== Quantum DLT-S4 ============== 1. When defining a device class for a Quantum DLT-S4 drive, use o devtype=DLT o format= Example: DEFine DEVclass devclassname DEVType=DLT FORMAT=DLTS4 ..... DEFine DEVclass devclassname DEVType=DLT FORMAT=DLTS4C ..... DLTS4 - Specifies that IBM Tivoli Storage Manager writes data that uses the DLTS4 recording format. This format results in a cartridge capacity of 800 GB when using Quantum DLT S4 media. DLTS4C - Specifies that IBM Tivoli Storage Manager writes data that uses the DLTS4 recording format with compression. This format results in a cartridge capacity of 1.6 TB when using Quantum DLT S4 media. 2. Quantum DLT-S4 drive has a data compression ratio of 2:1 3. Device identification and firmware level Drive ID : QUANTUM DLT-S4 Firmware : 0808 4. Supported media o DLT S4 Read/Write data cartridge o SDLT II data cartridge written by SDLT600 drive (Read Only) o SDLT I data cartridge written by SDLT320 drive (Read Only) 5. Quantum DLT-S4 drive reports drive serial number. ******************************************************************************* Library Information ******************************************************************************* o IBM Tivoli Storage Manager Extended Edition is required for a library with greater than 3 drives or greater than 40 storage slots. o The following figures depict the default element addresses of tape libraries. Element addresses are used by IBM Tivoli Storage Manager Server to address the tape drives and the storage slots contained by a SCSI Library/Autochanger. The element addresses of the storage slots may not directly correspond to the storage slot numbers. This is important because IBM Tivoli Storage Manager Server will always reference storage slots by element addresses, not storage slot numbers. o For a library with multiple drives, a drive element address is required for the DEFINE/UPDATE DRIVE command. However, if the library reports drive serial numbers, ELEMent=AUTODetect is supported and the element address is not required. o For the procedure to configure the autochanger and each drive in the library separately, see the 'Configuring a Tape Drive, or Autochanger' section of the IBM Tivoli Storage Manager Administrator's Guide. ------------------------------------------------------------------------------- Library Information for ADIC FastStor 2.1 Library ------------------------------------------------------------------------------- Addresses Addresses of Addresses of Addresses of Model #s of Drive Storage Slots Medium Changer Entry/Exit Slots --------------- ----------- ------------- -------------- ---------------- FastStor 2.1 86 1 - 8 82 N/A |--------------------------------| | _____ ______ _____ | | | 4 | | 3 | | 2 | | | |_____| |______| |_____| | | ____ ________ ____ | | | | | Drive | | | | | | 5 | | 86 | | 1 | | Front Panel | |____| |________| |____| | | _____ ______ _____ | | | 6 | | 7 | | 8 | | | |_____| |______| |_____| | | | |--------------------------------| Notes: 1. Library capacity 1 drives 8 slots 2. Barcodes are supported. 3. Firmware used during validation Library : ADIC FastStor 2.1 FW : 1.50 Drive : QUANTUM SDLT600 FW : 2222 4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported. 5. ADIC FastStor 2.1 is available with Quantum SDLT600 and HP LTO3 drives. ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Library Information for Fujitsu ETERNUS LT160 ------------------------------------------------------------------------------- Addresses Addresses of Addresses of Addresses of Model #s of Drive Storage Slots Medium Changer Entry/Exit Slots --------------- ----------- ------------- -------------- ---------------- A20 500 - 520 1000 - 1628 0 10 - 29 A32 500 - 532 1000 - 1466 0 10 - 29 Notes: 1. Library capacity 32 drives 628 slots 2. Barcodes are supported. 3. Firmware used during validation Library : FUJITSU NML9A --- Firmware : 0308 Drive : IBM ULTRIUM TD-2 --- Firmware : 53Y2 4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported. 5. All models of libraries are available with the following drives: o IBM and HP LTO-2 drives o IBM and HP LTO-3 drives 6. Mixed generations of LTO-1, LTO-2 and LTO-3 medias are supported by Fujitsu LT160 library. See "Libraries with Mixed Media Capability" at http://www-1.ibm.com/support/docview.wss?rs=663&uid=swg21155662 for more information. ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Library Information for IBM 87691VX ------------------------------------------------------------------------------- Addresses Addresses of Addresses of Addresses of Model #s of Drive Storage Slots Medium Changer Entry/Exit Slots --------------- ----------- ------------- -------------- ---------------- 87691VX 82 1 - 10 86 NA Drives _______ |___82__| Slots Slots _______ _______ |__ 1 __| |__ 6 __| |__ 2 __| _______ |__ 7 __| |__ 3 __| |__86 __| |__ 8 __| |__ 4 __| Robot |__ 9 __| |__ 5 __| |__ 10__| Notes: 1. Library capacity 1 drive 10 slots 2. Barcodes are supported. 3. Firmware used during validation Library : IBM 87691VX FW : A10D Drive : IBM VXA-3 FW : 3108 4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported. 5. IBM 87691VX is available with IBM VXA-3 drive. -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Library Information for Qualstar XLS-8 -------------------------------------------------------------------------------- Addresses Addresses of Addresses of Addresses of Model #s of Drive Storage Slots Medium Changer Entry/Exit Slots --------------- ----------- ------------- -------------- ---------------- XLS-820500 40000-40060 2000 - 7695 1000 60000 - 60120 XLS-832700 40000-40096 2000 - 8265 1000 60000 - 60120 Notes: 1. Library capacity 96 drives 6265 slots 2. Barcodes are supported. 3. Firmware used during validation Library : QUALSTAR XLS-8000 FW : 0223 Drive : IBM ULTRIUM-TD3 FW : 5BG2 4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported. 5. Qualstar XLS-8 Series is available with IBM Ultrium 3 drive. -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Library Information for Tandberg StorageLibrary T40 -------------------------------------------------------------------------------- Addresses Addresses of Addresses of Addresses of Model #s of Drive Storage Slots Medium Changer Entry/Exit Slots --------------- ----------- ------------- -------------- ---------------- StorageLibrary 256 - 257 4096 - 4132 1 16 - 18 T40 Notes: 1. Library capacity 2 drives 40 slots 2. Barcodes are supported. 3. Firmware used during validation Library : TANDBERG StorageLoader FW : 0243 Drive : IBM ULTRIUM-TD3 FW : 5BG2 4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported. 5. Tandberg StorageLibrary T40 is available with IBM LTO2 and LTO3 drives. --------------------------------------------------------------------------------