Tivoli Storage Manager for OS390/MVS Server

Licensed Materials - Property of IBM
(C) Copyright IBM Corporation 1990, 2000. All rights reserved.

Version 4, Release 2, Level 3.3
 Currently, Tivoli Development is offering a fixtest
 level server 4.2.3.3  built on 4.2.3  base to correct
 problems documented in the accompanying readme file.

This replacement server is provided in the form of executable
module; ANRSERV.

The fixtest file is an 80 byte FB binary file which is in XMIT
format and represents a link library. The term "XMIT format"
describes a technique utilizing the TSO xmit command.  From ISPF 3.4
the following command was issued against V4233.SERVER.LINKLIB

xmit 99.99 da(/) outda(V4233.LINKLIB.XMITFMT)

The result is physical sequential data set which can be transferred
through a network in binary format to an MVS system.

Pre allocate a Physical Sequential data set with the following
attributes where you can "put" the fixtest file using FTP binary
transfer.

The following table describes the number of bytes reported by FTP when
moving the fixtest file, number of records to expect in the resulting
file and the number of blocks required for a physical sequential data
set on MVS assuming 3390, recfm=FB,lrecl= 80 with block size of 3120.

Note: Make sure the PTF files are moved using "binary" file transfer.
The "bin" file extension was added as an indicator to ensure binary
FTP transfer.

____________________________________________________________________
Name                      |description        | ftp bytes  | blocks

v4233.linklib.xmitfmt       Server Executable   12823200     4110
v4233.messages.xmitfmt      Server Messages       591120      190
Once the file has been FTP'ed to MVS issue the following
TSO command to reverse the XMIT format file and create a link library.

receive indsn(V4233.LINKLIB.XMITFMT.BIN)

If you wish to preallocate the receiving dataset, use your existing 4.2.3
linklib dataset as a reference for data set attributes.

If you choose, you can APF authorize V4233.LINKLIB and start ADSM
using the newly created link library, or copy the executable ANRSERV
into an APF authorized link library.

We strongly advise that you do not replace your installed code
with this patch, but instead place it in a temporary linklib and access
that linklib until an installable PTF is available.

Note:  The V4233.MESSAGES(ANRMENU) message repository should be
       used with the V4233.LINKLIB(ANRSERV).  This is done by
       updating your DSMAMENG  DD statement in you ANRSTART jcl.
       Reference your 4.2.3 installation for other DD data sets
       require to run Tivoli Storage Manager



Thanks,  Tivoli Storage Manager Development