This page deals with the following products:
Minimal Angle when Generating APT File |
COV_EXP + LASER + APT (Neutral format): the angl value specifies the minimum value of angle in the model it can consider for generating the APT. For taking all corners into consideration, the value user specifies in angl should be less than the values of angles of the corners in the model.
Example 1 User has specified the angl value as 30 deg in the above UI and the angles for corners in the model are 40 deg and 60 deg. The situation is correct: since the value specified by the user is 30deg and the angle values for the corner are 40 deg and 60 deg, CATIA V4 will take these corners into consideration while generating the APT source.
Example 2 User has specified the angl value as 30 deg in the above UI and the angles for corners in the model are 10 deg and 20 deg. The situation is here not correct, since the value specified by the user is 30 deg and the angle values for the corner are 10 deg and 20 deg, CATIA V4 will not take these corners into consideration while generating the APT source. |
None |
|
None |
None |
None |
|
None |
None |
None |
|
None |